Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью David Laffie -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Grasp the white plastic tab attached to the hard drive and pull it to the right, removing the hard drive from the computer.
[* icon_reminder] The hard drive goes back into its compartment with the label facing down.
[* black] NOTE: When putting the new drive back into the slot, be sure to check the rubber rails on each side. (Use a flashlight to look into the HD compartment.) If one or both are loose or have come away from the metal sides, it will be necessary to secure them before proceeding. Secure with silicone caulk (small amount!). To get into compartment see "Hard Drive Connector" Guide. Replacements for damaged rails can be found at welovemacs.com.