Перейти к основному содержанию

Возврат к шагу #2

Редактировать с помощью filchambers -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
- [* red] Two 3 mm Phillips #000.
- [* orange] One 4 mm Phillips #000 on the right side.
+ [* red] One 3 mm Phillips #000.
+ [* orange] Two 4 mm Phillips #000 on the right side.
+ [* black] Photo is slightly incorrectly labeled, the 3mm screw is in the centre and there are 2x 4mm screws on the outside.
[* icon_reminder] When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes.