Перейти к основному содержанию

Возврат к шагу #2

Редактировать с помощью mpardus -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] Two 3 mm Phillips #00.
[* orange] One 4 mm Phillips #00 on the right side.
-[* icon_reminder] When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes.
+[* icon_reminder] When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes. Be sure to reinstall screws into the bottom holes. (bracket screws go into holes above later)