Перейти к основному содержанию

Возврат к шагу #2

Редактировать с помощью Suri -

Правка отклонена автор Jake Devincenzi

До
После
Без изменений

Шаг Линий

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
- [* red] Two 3 mm Phillips #00.
- [* orange] One 4 mm Phillips #00 on the right side.
+ [* red] Two 3 mm Phillips #00. (In some cases two 4mm)
+ [* orange] One 4 mm Phillips #00 on the right side. (In some cases one 3mm, see above)
[* icon_reminder] When reinstalling these screws, press gently on the lower case to line up the screw holes.