Перейти к основному содержанию

Возврат к шагу #2

Редактировать с помощью Aaron Cooke -

Правка одобрена автор Taylor Dixon

Без изменений

Шаг Линий

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] Two 3 mm Phillips #00. (A1181 has three 3 mm screws and one 4 mm.)
[* orange] One 4 mm Phillips #00 on the right side.
[* icon_reminder] When reinstalling these screws, press gently on the lower case to line up the screw holes.
+[* icon_note] These screws easily strip, so be careful while taking these particular screws out.