Перейти к основному содержанию

Возврат к шагу #5

Отредактированно Marc -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

[* black] Remove the following 4 screws from the back of the computer:
- [* red] Two 7 mm Philips on the far sides.
+ [* red] Two 7 mm shouldered Philips on the far sides.
[* orange] Two 10.5 mm Phillips toward the center.
[* icon_note] Do not over-tighten these; you can cause the case to distort.