Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Изменения в этом шаге

Редактировать с помощью Matt Spellacy -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Identify the speakers on the underside of the speaker panel. Unplug
[* black] Unplug
the black and red wires connecting the speakers—on both ends of the panel—to a circuit board on the center of the panel by carefully pulling at the wires close to their connection with the circuit board. Remove
[* black] Remove
the adhesive tape securing the speaker wires to the panel. Using
[* black] Using
a Phillips screwdriver, remove the four screws—two screws and two brackets—two screws and one bracket per speaker—holdingspeaker— holding the speakers in place.
[* black] Identify the speakers on the underside of the speaker panel. Unplug
[* black] Unplug
the black and red wires connecting the speakers—on both ends of the panel—to a circuit board on the center of the panel by carefully pulling at the wires close to their connection with the circuit board. Remove
[* black] Remove
the adhesive tape securing the speaker wires to the panel. Using
[* black] Using
a Phillips screwdriver, remove the four screws—two screws and two brackets—two screws and one bracket per speaker—holdingspeaker— holding the speakers in place.