Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #5

Редактировать с помощью Alex Scott -

Правка одобрена автор David Hodson

Удален
Добавлено
Без изменений

Шаг Линий

[* black] A sticky adhesive holds the speakers in place in addition to the screws. The speakers will likely be reluctant to detach from the panel due to this cement.
[* icon_reminder] Before removing the speaker, unplug the black and red wires from the circuit board.
[* black] To overcome the adhesive and remove the speakers, place Place the screw driver in the needle hole of the speaker and lift uppry out. This should be all that needs to be done to pop the speaker out.
[* black] To overcome the adhesive and remove the speakers, place Place the screw driver in the needle hole of the speaker and lift uppry out. This should be all that needs to be done to pop the speaker out.
[* black] A good amount of force may be necessary to completely overcome the adhesive. NOTE. The tweezers or needle nose pliers can be used in place of the screw driver.

Изображение 1

Старая версия

Новая версия