Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #6

Редактировать с помощью Alex Scott -

Правка одобрена автор David Hodson

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Place the new speakers into the circular mold that held the old speakers, making sure to align the notch inside the molds with the indents on the outer rim of the speakers.
[* black] Replace the two metal brackets and all four screws—one bracket and two screws for each speaker—to keep the speakers in place.
[* black] Holding them such that the visible metal contacts are facing up, insert the white plastic end of each speaker wire into their respective connectionsconnection ports on the circuit board.
[* black] Holding them such that the visible metal contacts are facing up, insert the white plastic end of each speaker wire into their respective connectionsconnection ports on the circuit board.
[* black] Replace the tape securing the wires to the panel.
[* icon_note] ''If you do not wish to replace the keyboard, proceed to Step 9: Reassembling the Sound Panel.''