Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #4

Редактировать с помощью Alex Scott -

Правка одобрена автор Alex Scott

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Identify the speakers on the underside of the speaker panel. Unplug the black and red wires connecting the speakers—on both ends of the panel—to athe circuit board on the center of the panel by carefully pulling at the wires close to their connection (red markers) with the circuit board.
[* black] Identify the speakers on the underside of the speaker panel. Unplug the black and red wires connecting the speakers—on both ends of the panel—to athe circuit board on the center of the panel by carefully pulling at the wires close to their connection (red markers) with the circuit board.
[* black] Using a Phillips screwdriver, remove the four screws—two screws per speaker— and the metal brackets holding the speakers in place. Place the screws and brackets in a secure place – they will be replaced later.
[* black] Remove the adhesive tape securing the speaker wires to the panel.

Изображение 1

Старая версия

Новая версия