Перейти к основному содержанию

Изменения к шагу №2

Отредактированно Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Gently pull the battery adhesive tab upward and away from the battery, allowing the adhesive stripsstrip to slowly slide out from between the battery and the rear case.
[* black] Gently pull the battery adhesive tab upward and away from the battery, allowing the adhesive stripsstrip to slowly slide out from between the battery and the rear case.
[* black] Continue pulling the adhesive tab until you feel increased resistance, and then stop.
[* icon_note] If the battery adhesive tabs break off at any point during the removal process, use your fingers or blunt tweezers to retrieve the remaining length of adhesive, and continue pulling.
[* icon_caution] If any of the adhesive strips break off underneath the battery and cannot be retrieved, '''skip to step 12'''.