Перейти к основному содержанию

Изменения к шагу №2

Отредактированно Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Gently pull the battery adhesive tab straight upwardaway from the battery, toward the bottom of the iPhone.
[* black] To avoid tearing the adhesive stripstrip, be careful not to pull against the battery or lower components.
[* black] Continue pulling, allowing the strip to slowly slip out from between the battery and the rear case. When you feel increased resistance from the strip, stop pulling and continue with the next step.
[* black] Gently pull the battery adhesive tab straight upwardaway from the battery, toward the bottom of the iPhone.
[* black] To avoid tearing the adhesive stripstrip, be careful not to pull against the battery or lower components.
[* black] Continue pulling, allowing the strip to slowly slip out from between the battery and the rear case. When you feel increased resistance from the strip, stop pulling and continue with the next step.
[* icon_note] If the battery adhesive tabs break during the removal process, use your fingers or blunt tweezers to retrieve the remaining length of adhesive, and continue pulling.
[* icon_caution] If any of the adhesive strips break underneath the battery and cannot be retrieved, try to remove the remaining strips, and then proceed to '''[guide|29424|Step 25|stepid=69623]'''.