Перейти к основному содержанию

Возврат к шагу #13

Редактировать с помощью David Hodson -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Flip the phone over and remove the front panel.
-[* black] If you need to remove the digitizer (glass) from the front panel, carefully push the glass out from the back side of the front panel in one corner, the flip it over and run a screwdriver/spludger around the outside edge.
-[* black] If you're replacing the digitizer after breakage, be aware of the glass fragments and, if possible, start from the corner that is least damaged and proceed around to the most damaged areas. The digitizer is safety glass, so it should mostly hold together.