Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #1

Редактировать с помощью Andrew Bookholt -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Insert the flat end of a spudger between the thin rubber strip surrounding the front display bezel and the rear display bezel.
[* icon_caution] '''Do not''' try to insert the spudger between the thin rubber strip and the plastic face of the front display bezel.
[* black] Use the flat end of your spudger to carefully pry the front display bezel away from the adhesive securing it to the rear display bezel.
[* icon_caution] Do not pry against the fragile glass LCD panel. Also, do not excessively bend the plastic,plastic as it may permanently deform.
[* icon_caution] Do not pry against the fragile glass LCD panel. Also, do not excessively bend the plastic,plastic as it may permanently deform.
[* black] Continue prying until the front display bezel is free along the right side of the display and behind the right clutch hinge.