Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #15

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* black] Remove the following screws securing the logic board to the rear case:
[* red] Two 1.9 mm Phillips screws
[* orange] One 2.3 mm standoff screw
[*[* icon_note] UseStandoff screws are best removed with a [product|IF145-388-5|standoff screwdriver|new_window=true] or [product|IF145-343|standoff driver bit]. A small flathead screwdriver to remove these standoff screws.
[* icon_reminder] During reassembly, you
can also do the job—but use the tip of a spudgerextra caution to get the standoff screw startedensure it doesn't slip and damage surrounding components.
[*[* icon_note] UseStandoff screws are best removed with a [product|IF145-388-5|standoff screwdriver|new_window=true] or [product|IF145-343|standoff driver bit]. A small flathead screwdriver to remove these standoff screws.
[* icon_reminder] During reassembly, you
can also do the job—but use the tip of a spudgerextra caution to get the standoff screw startedensure it doesn't slip and damage surrounding components.