Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Luke Soules -

На одобрении

До
После
Без изменений

Шаг Линий

-[* black] Just like with the iPhone 3Gs, the outer casing comes off with a simple removal of two Phillips screws.
+[* black] Like the iPhone 3G and 3GS, there are two silver [product|IF145-006|Phillips #00] screws at the bottom of the phone.
+[* black] In a departure from the design of the 3G and 3GS, removing the screws releases the rear case, not the front glass.
+[* black] This design makes replacing the rear panel trivial, but unfortunately means that replacing the front glass will likely be rather challenging.