Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Miroslav Djuric -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Like the iPhone 3G and 3GS, there are two silver [product|IF145-006|Phillips #00] screws at the bottom of the phone.
[* black] In a departure from the design of the 3G and 3GS, removing the screws releases the rear case, not the front glass.
-[* black] This design makes replacing the rear panel trivial, but unfortunately means that replacing the front glass will likely be rather challenging.
+[* black] This design makes switching out the rear panel trivial, but unfortunately means that [[Topic:iPhone 4|replacing the iPhone 4 front panel]] will likely be rather challenging.