Перейти к основному содержанию

Changes to Step #1

Edit by Andrea Flores

Правка одобрена автор Andrea Flores

Удален
Добавлено
Без изменений

Шаг Линий

[title] Right Speaker
[* blackred] To begin removing the right speaker, lift the speaker wire with a screwdriver or spudger, as shown in the first picture.
[* blackred] To begin removing the right speaker, lift the speaker wire with a screwdriver or spudger, as shown in the first picture.
[* black] Make sure to lift the wire up until the glued parts of the wire are completely separated from the device.
[* icon_caution] Be careful and gentle when removing the wire connection for the speaker. You may want to use a heat source, such as a heat gun or a blow dryer, to dissipate the glue.
[* red] Once the wires are disconnected, removeblack] After carefully removing the speaker flat-topped connector ,remove the 1.33x2.00mm Phillps screw, as shown in the secondfirst picture.
[* black] After removing the screw, lift the speaker with the tweezers.
[* red] Once the wires are disconnected, removeblack] After carefully removing the speaker flat-topped connector ,remove the 1.33x2.00mm Phillps screw, as shown in the secondfirst picture.
[* black] After removing the screw, lift the speaker with the tweezers.

Image 1

Старая версия

Новая версия