Перейти к основному содержанию

Changes to Step #1

Edit by Natalie Gibbons

Правка одобрена автор Natalie Gibbons

Удален
Добавлено
Без изменений

Шаг Линий

[*title] Right Speaker
[*
black] To begin removing the right speaker, lift the speaker wire with a screwdriver or Spudgerspudger, as shown in the first picture.
[* black] Make sure to lift the wire up,up until the glued parts of the wire are completely offseparated from the device.
[* icon_caution] If the wire is hard to remove, use a heat source, such as a heat gun toor a blow dryer, to soften the glue. This will make the speaker removal easier.
[* red] Once the speakerswires are off, remove the screw, as shown in the second picture.
[*title] Right Speaker
[*
black] To begin removing the right speaker, lift the speaker wire with a screwdriver or Spudgerspudger, as shown in the first picture.
[* black] Make sure to lift the wire up,up until the glued parts of the wire are completely offseparated from the device.
[* icon_caution] If the wire is hard to remove, use a heat source, such as a heat gun toor a blow dryer, to soften the glue. This will make the speaker removal easier.
[* red] Once the speakerswires are off, remove the screw, as shown in the second picture.
[* black] After removing the screw, lift the speaker with the tweezers.