Перейти к основному содержанию

Changes to Step #1

Edit by Natalie Gibbons

Правка одобрена автор Natalie Gibbons

Удален
Добавлено
Без изменений

Шаг Линий

[title] Right Speaker
[* black] To begin removing the right speaker, lift the speaker wire with a screwdriver or spudger, as shown in the first picture.
[* black] Make sure to lift the wire up until the glued parts of the wire are completely separated from the device.
[* icon_caution] IfBe careful and gentle when removing the wire is hardconnection for the speaker. You may want to remove, use a heat source, such as a heat gun or a blow dryer, to softento dissipate the glue. This will make the speaker removal easier.
[* red] Once the wires are offdisconnected, remove the screw, as shown in the second picture.
[* icon_caution] IfBe careful and gentle when removing the wire is hardconnection for the speaker. You may want to remove, use a heat source, such as a heat gun or a blow dryer, to softento dissipate the glue. This will make the speaker removal easier.
[* red] Once the wires are offdisconnected, remove the screw, as shown in the second picture.
[* black] After removing the screw, lift the speaker with the tweezers.