Перейти к основному содержанию

Changes to Step #3

Edit by Andrea Flores

Правка одобрена автор Andrea Flores

Удален
Добавлено
Без изменений

Шаг Линий

[* icon_note] For this section of the guide, please put on some goggles for safety. Some broken glass pieces may fly out as wered] To remove the screen.
[* black] Starting from
left speaker remove the top of the device, place the pry tool between the screen and the side. Begin to carefully lift the screen from the devicespeaker wire, as shown in the first picture.
[* black] Continue liftingicon_caution] If the screen fromwire is hard to remove, use a heat gun to soften the rest ofglue. This will make the device. If at some point it becomes to difficultspeaker removal easier.
[* black] Once the connection has been released, use your Spudger or tweezer
to lift the screen, heatspeaker up, as shown in the device using the heat gun at that location.second picture
[* icon_note] For this section of the guide, please put on some goggles for safety. Some broken glass pieces may fly out as wered] To remove the screen.
[* black] Starting from
left speaker remove the top of the device, place the pry tool between the screen and the side. Begin to carefully lift the screen from the devicespeaker wire, as shown in the first picture.
[* black] Continue liftingicon_caution] If the screen fromwire is hard to remove, use a heat gun to soften the rest ofglue. This will make the device. If at some point it becomes to difficultspeaker removal easier.
[* black] Once the connection has been released, use your Spudger or tweezer
to lift the screen, heatspeaker up, as shown in the device using the heat gun at that location.second picture