Перейти к основному содержанию

Изменения к шагу №1

Отредактированно Brett Hartt -

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* icon_note] OrientIn the Xbox 360 S so thatfollowing steps, you will remove the hard drive portbottom vent. It is facing up and the front panel is facingattached to the left.
[* black] Insert a metal spudger between the black
bottom vent and the silver rim of the bottom panel, in the rear right corner of the vent.
[* black] Rotate the spudger away from the console, prying the vent away from the bottom panel.
[* icon_note] Be sure to rotate the spudger far enough so that
panel by the seven clips on the vent clear the silver rim of the bottom panelshown.
[* icon_note] OrientIn the Xbox 360 S so thatfollowing steps, you will remove the hard drive portbottom vent. It is facing up and the front panel is facingattached to the left.
[* black] Insert a metal spudger between the black
bottom vent and the silver rim of the bottom panel, in the rear right corner of the vent.
[* black] Rotate the spudger away from the console, prying the vent away from the bottom panel.
[* icon_note] Be sure to rotate the spudger far enough so that
panel by the seven clips on the vent clear the silver rim of the bottom panelshown.

Изображение 1

Нет предыдущего изображения

Добавлено