Перейти к основному содержанию

Возврат к шагу #10

Редактировать с помощью Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

[* black] Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case.
-[* black] Cease prying when the I/O board is visibly separated from the outer case.
-[* black] Remove the Mac Mini Logic Board Removal tool.
+[* black] Cease prying when the removal tool makes contact with the opening in the rear case.
+[* icon_note] Remove the Mac Mini Logic Board Removal tool.