Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью Kevin Savage -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* black] Lift up the black connector ribbon to see the black oval shaped piece of tape. Carefully peel off the tape that secures the SATA cable connector to the hard drive.
[* black] Pull the SATA cableThe connector straight out ofwill now almost fall off. Simply pull it off. If it's not coming off, check the hard driveabove step to ensure you've removed securing tape.
[* black] Lift up the black connector ribbon to see the black oval shaped piece of tape. Carefully peel off the tape that secures the SATA cable connector to the hard drive.
[* black] Pull the SATA cableThe connector straight out ofwill now almost fall off. Simply pull it off. If it's not coming off, check the hard driveabove step to ensure you've removed securing tape.
[* black] Carefully peel off the two black sticky pads (one visible in picture) from the hard drive and stick them to your new hard drive in the same locations.