Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* black] Lift up the black connector ribbon to see the black oval shaped piece of tape. Carefullyribbon cable and carefully peel offaway the black tape thatunderneath, which secures the SATA cable connector to the hard drive.
[* black] ThePull the SATA cable connector will now almost fall off. Simply pull it off. If it's not coming off, checkstraight out of the above step to ensure you've removed securing tapehard drive.
[* black] Carefully peel off the two blackblack, square-shaped sticky pads (one visible in picture) from the corners of the hard drivedrive, and stick them to your new hard drive in the same locations.
[* black] Lift up the black connector ribbon to see the black oval shaped piece of tape. Carefullyribbon cable and carefully peel offaway the black tape thatunderneath, which secures the SATA cable connector to the hard drive.
[* black] ThePull the SATA cable connector will now almost fall off. Simply pull it off. If it's not coming off, checkstraight out of the above step to ensure you've removed securing tapehard drive.
[* black] Carefully peel off the two blackblack, square-shaped sticky pads (one visible in picture) from the corners of the hard drivedrive, and stick them to your new hard drive in the same locations.