Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #5

Редактировать с помощью Brett Hartt -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Grasp the controller by the battery compartment and the headphone jack.
[* black] PryLift the battery compartment away from the headphone jack, separating the rear panellower case from the front panelupper case and logic board.
[* icon_note] Removingicon_reminder] The battery contact springs are held in place by slots in the battery housing in the rear panel may take some forcelower case. Be sure to re-align them properly during reassembly.
[* black] PryLift the battery compartment away from the headphone jack, separating the rear panellower case from the front panelupper case and logic board.
[* icon_note] Removingicon_reminder] The battery contact springs are held in place by slots in the battery housing in the rear panel may take some forcelower case. Be sure to re-align them properly during reassembly.