Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Изменения в этом шаге

Редактировать с помощью simonhawkridge -

Правка отклонена автор Evan Noronha

До
После
Без изменений

Шаг Линий

[* black] For Model A1212 the two larger white connectors depicted in the mid-ground of the photograph published, and highlighted by two yellow square outlines have to be VERY carefully removed from the logic board using the spudger tool by lifting the white connectors in a straight upwards direction.
[* black] I would strongly recommend using a magnifying glass to ensure you can clearly see where your poking the plastic spudger tool to avoid causing damage to the logic board push on connections which are extremely small and fragile!) .
[* black] The smaller white connector highlighted with a yellow square identifying its location, visible in the background of the photo in step 4 , has to be carefully detached from the logic board using the spudger tool by moving it in a lLEFT direction (i. e. in the direction where the left hand speaker was located before being removed)