Skip to main content

Changes to Step #4

Edit by Andrew Bookholt

На одобрении

Deleted
Added
Unchanged

Step Lines

[* black] To release the clips, work from the middle of the top vent.
[* black] While slightly lifting the front edge of the top vent, use the tip of a spudger to push the clips closest to the frontcenter of the top vent toward the inside of the 360.
[* black] While slightly lifting the front edge of the top vent, use the tip of a spudger to push the clips closest to the frontcenter of the top vent toward the inside of the 360.

Image 2

No previous image

Added