Перейти к основному содержанию

Changes to Step #20

Edit by Andrew Optimus Goldheart

Правка одобрена автор Andrew Optimus Goldheart

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Slide the lower left pick to the lower left corner to cut the adhesive on that corner.
[* black] Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad.
[* icon_note] TheThere are quite a few things to avoid beneath the lower bezel, so study the third image shows the two antennas and the homeclosely:
[* red] Antennas
[* orange] Home
button cavity in the lower case of the iPad.
[* yellow] Digitizer cable
[*
black] The following steps will direct you where to pry to avoid damage to these components. Only apply heat and pry where directed.
[* icon_note] TheThere are quite a few things to avoid beneath the lower bezel, so study the third image shows the two antennas and the homeclosely:
[* red] Antennas
[* orange] Home
button cavity in the lower case of the iPad.
[* yellow] Digitizer cable
[*
black] The following steps will direct you where to pry to avoid damage to these components. Only apply heat and pry where directed.

Image 3

Нет предыдущего изображения

Добавлено