Перейти к основному содержанию

Changes to Step #5

Edit by Matthew Newsom

На одобрении

Без изменений

Шаг Линий

[* black] Finally, cables that are not soldered to the board! The RCA cable is easily removed.
[* black] Ironically the cable is much easier to remove in the Atari 2600 than in the [guide|3527|RCA Studio II].
[* black] The motherboard easily lifts out without any additional screws or clips to hold it in place. The only thing securing it down were the angled screws in the outer case.