Skip to main content

Changes to Step #5

Edit by Brett Hartt

На одобрении

Deleted
Added
Unchanged

Step Lines

[* black] Finally, cables that are not soldered to the board! (take notes, [guide|3531|Magnavox]) The RCA cable is easily removed.
[* black] Ironically the cable is much easier to remove in the Atari 2600 than in the [guide|3527|RCA Studio II].
[* black] Finally, cables that are not soldered to the board! (take notes, [guide|3531|Magnavox]) The RCA cable is easily removed.
[* black] Ironically the cable is much easier to remove in the Atari 2600 than in the [guide|3527|RCA Studio II].
[* black] The motherboard easily lifts out without any additional screws or clips to hold it in place. The only thing securing it down were the angled screws in the outer case.