Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #2

Редактировать с помощью Andrew Bookholt -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Insert wisdom hereWhile the front panel is still warm, use the edge of an iPod opening tool to pry it the headphone jack side of the front panel assembly out of the Nano.
[* icon_caution] Do not attempt to pry out the front panel assembly from the left side of the device, as the display data cable may be damaged.
[* black] Continue prying the perimeter of the front panel assembly out of the outer casing, being careful not to damage the display data cable held under its left edge.
[* icon_note] If the front panel is excessively difficult to lift out of the outer case, reheat the area and try again
.
[* black] Insert wisdom hereWhile the front panel is still warm, use the edge of an iPod opening tool to pry it the headphone jack side of the front panel assembly out of the Nano.
[* icon_caution] Do not attempt to pry out the front panel assembly from the left side of the device, as the display data cable may be damaged.
[* black] Continue prying the perimeter of the front panel assembly out of the outer casing, being careful not to damage the display data cable held under its left edge.
[* icon_note] If the front panel is excessively difficult to lift out of the outer case, reheat the area and try again
.