Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #4

Редактировать с помощью Geoff Wacker -

Правка одобрена автор Geoff Wacker

До
После
Без изменений

Шаг Линий

[* black] Use flat end of a spudger to lift the LCD connector up off its socket on the logic board.
[* black] Use flat end of a spudger to lift the LCD connector up off its socket on the logic board.
[* icon_caution] Do not pry against the large IC next to the connector, or you may break it. Gently pry from the side of the connector as shown.