Перейти к основному содержанию

Возврат к шагу #6

Редактировать с помощью Philip Brasch -

Правка отклонена автор Jake Devincenzi

До
После
Без изменений

Шаг Линий

[* black] There is a metal cover with a clip and hook mechanism covering the rear-facing camera. Pry up and away to the left on the metal cover to release the clip.
[*
black] Use the edge of an iPod opening tool to prypeel back the thin copper cover up from the rear-facing camera. Be careful not to tear.
[* black] There is a metal cover with a clip and hook mechanism covering the rear-facing camera. Pry up and away to the left on the metal cover to release the clip.
[*
black] Use the edge of an iPod opening tool to prypeel back the thin copper cover up from the rear-facing camera. Be careful not to tear.
[* icon_note] Note the small spring located near the bezel next to the camera (highlighted in yellow).
[* black] RemoveIn the next step, remove the steel cover from the iPod.
[* black] RemoveIn the next step, remove the steel cover from the iPod.