Перейти к основному содержанию

Возврат к шагу #6

Редактировать с помощью Philip Brasch -

Правка отклонена автор Jake Devincenzi

До
После
Без изменений

Шаг Линий

[* black] UseThere is a metal cover with a clip and hook mechanism covering the rear-facing camera. Use the edge of an iPod opening tool to pry up and away to the left on the metal cover to release the clip.
[* black] Peel forward
the thin copper cover up from the rear-facing camera. Be careful not to tear.
[* black] UseThere is a metal cover with a clip and hook mechanism covering the rear-facing camera. Use the edge of an iPod opening tool to pry up and away to the left on the metal cover to release the clip.
[* black] Peel forward
the thin copper cover up from the rear-facing camera. Be careful not to tear.
[* icon_note] Note the small spring located near the bezel next to the camera (highlighted in yellow).
[* black] RemoveIn the next step, you will remove the steel covermid plane from the iPod.
[* black] RemoveIn the next step, you will remove the steel covermid plane from the iPod.