Перейти к основному содержанию

Возврат к шагу #7

Редактировать с помощью Scott Head -

На одобрении

Без изменений

Шаг Линий

[* black] Insert the edge of an iPod opening tool under the steel mid plane near the bottom left corner of the Touch.
[* black] Pry upward to separate the plate from the adhesive securing it to the plastic inner case.
[* icon_caution] Use extreme care, the speaker is under the area shown in photo. It is connected with very thin and short wires.
[* orange] There is a very thin ribbon cable here that connects the volume and power buttons to the logic board. Try to work around this area like shown so not to rip the cable. It it extremely fragile.

Изображение 2

Старая версия

Новая версия