Перейти к основному содержанию

Возврат к шагу #8

Редактировать с помощью Philip Brasch -

Правка отклонена автор Jake Devincenzi

До
После
Без изменений

Шаг Линий

[* black] Slightly tilt the steel mid plane to dislodge it from the rear case.
[* icon_caution] Be careful not to tear the piece of copper tape connecting the rear-facing camera to the steel mid plane. If you've completed step 6 properly, this won't be an issue.
[* black] Lift the steel mid plane up off the rear case and peel off the piece of copper tape stuck to the rear-facing camera. (See step 6.)
[* icon_caution] Be careful not to tear the piece of copper tape connecting the rear-facing camera to the steel mid plane. If you've completed step 6 properly, this won't be an issue.
[* black] Lift the steel mid plane up off the rear case and peel off the piece of copper tape stuck to the rear-facing camera. (See step 6.)

Изображение 1

Старая версия

Новая версия

Изображение 2

Старая версия

Новая версия