Перейти к основному содержанию

Возврат к шагу #8

Редактировать с помощью Phil -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Slightly tilt the steel mid plane to dislodge it from the rear case.
[* icon_caution] Be careful not to tear the piece of copper tape connecting the rear-facing camera to the steel mid plane. This can often be accidently glued to the steel plate and easily ripped.
[* icon_caution] Be careful not to tear the piece of copper tape connecting the rear-facing camera to the steel mid plane. This can often be accidently glued to the steel plate and easily ripped.
[* black] Lift the steel mid plane up off the rear case and peel off the piece of copper tape stuck to the rear-facing camera.