Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #7

Редактировать с помощью Brett Hartt -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Carefully turn the daughterboard over, making sure to not break the attached cable.
[* black] Remove the IR sensor cable from its socket on the daughterboard.
[* icon_caution] Be sure that you are pulling from the connector, not from the cables or on the socket itself.
[* black] Blu-Ray drive remains.
[* icon_note] If you are replacing the Blu-ray drive, you must use the same daughterboard that came with your PlayStation 3. The daughterboard is paired to the Motherboard, and the Blu-ray drive will not work with a foreign board.