Возврат к шагу #7
Редактировать с помощью Brett Hartt -
- До
- После
- Без изменений
Шаг Линий
| [* black] Carefully turn the daughterboard over, making sure to not tear the attached cable. |
| [* black] Pull the IR Sensor cable straight away from its socket on the board. |
| [* icon_caution] Be sure that you are not pulling on the cables as you remove the plug from its socket. |
| [* black] Blu-Ray drive remains. |
| [* icon_note] If you are replacing the Blu-ray drive, you must use the same daughterboard that came with your PlayStation 3. The daughterboard is paired to the motherboard, and the Blu-ray drive will not work with a |
| [* icon_note] If you are replacing the Blu-ray drive, you must use the same daughterboard that came with your PlayStation 3. The daughterboard is paired to the motherboard, and the Blu-ray drive will not work with a |