Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #1

Редактировать с помощью Anthony Larratt -

Правка одобрена автор Anthony Larratt

До
После
Без изменений

Шаг Линий

[title] Remove the Screen
[* black] Insert the flat end of one of the plastic opening tools between the screen and the colored back cover. Gently pry apart the pieces.
[* black] Insert the flat end of the other plastic opening tool between the screen and the back cover, and gently pry the pieces apart.
[* black] Repeat this step alternating plastic opening tools around the whole device until the screen and back cover are separated.
[* black] Carefully separate the screen from the back, taking care not to rip the ribbons connecting them.
[* black] Remove the 3 pieces of tape going from the battery to the board, and pry the battery up from the right side.
[* black] Remove the plastic covering over the battery connector, and unplug the battery.