Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

[* black] Insert the flat end of a spudger between the upper and lower case where they meet at the rear of the side vent opening.
-[* icon_note] There is a strong plastic clip connecting the two, so you'll need to use quite a bit of force. Leave the spudger in place when you've created a gap, to prevent the clip from re-attaching.
+[* icon_note] There is a strong plastic clip connecting the two case halves (the first of many), so you'll need to use quite a bit of force. Leave the spudger in place when you've created a gap, to prevent the clip from re-attaching.