Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Makayla Williams -

Правка отклонена автор Adam O'Camb

До
После
Без изменений

Шаг Линий

[* black] Insert the flat end of a spudger between the upper and lower case where they meet at the rear of the side vent opening.
[* icon_note] There is a strong plastic clip connecting the two case halves (the first of many), so you'll need to use quite a bit of force.
-[* icon_note] Leave the spudger in place until you open the case completely. The clips are very springy and may cause the case to snap shut while you're working.
+[* black] Leave the spudger in place until you open the case completely. The clips are very springy and may cause the case to snap shut while you're working.