Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Dustin Meiners -

Правка отклонена автор Carsten Frauenheim

До
После
Без изменений

Шаг Линий

-[* black] Insert the flat end of a spudger between the upper and lower case where they meet at the rear of the side vent opening.
+[* black] Insert the flat end of a spudger between the upper and lower case where they meet at the rear of the side vent opening. Alternatively, press down on the larger bottom portion while lifting up on the smaller top portion to undo the clip.
[* icon_note] There is a strong plastic clip connecting the two case halves (the first of many), so you'll need to use quite a bit of force.
[* icon_note] Leave the spudger in place until you open the case completely. The clips are very springy and may cause the case to snap shut while you're working.