Перейти к основному содержанию

Возврат к шагу #9

Редактировать с помощью Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

[* icon_note] The front button cable has a unique ZIF connector—pay attention to the next few steps to safely disconnect it.
-[* black] User tweezers to lift the plastic retaining loop over the connector on the board.
-[* black] Use the tip of a spudger to push the connector's retaining tab to the right.
+[* black] Use tweezers to lift the plastic retaining loop over the connector on the board.
+[* black] Use the tip of a spudger to push the connector's retaining tab toward the cable to unlatch it.