Перейти к основному содержанию

Изменения в этом шаге

Edit by Alden Simmer

Правка одобрена автор Alden Simmer

Удален
Добавлено
Без изменений

Шаг Линий

[title] Removing the Left Side Ribbons
[* black] Using your fingers, pull up on ribbon connector to expose another ribbon connector below.
[* red] Unscrew the two 2mm screws on top of the second ribbon connector with the 2 mm#000 Phillips screwdriverhead.
[* red] Unscrew the two 2mm screws on top of the second ribbon connector with the 2 mm#000 Phillips screwdriverhead.
[* black] Pull up the ribbon connector with your fingers to detach it from the board.