Перейти к основному содержанию

Изменения в этом шаге

Edit by Alden Simmer

Правка одобрена автор Alden Simmer

Удален
Добавлено
Без изменений

Шаг Линий

[title] Remove the Bottom-right Circuit Board
[* red] Unscrew the three 3 mmtwo 3mm T5 Torx screws securing the circuit board on the right.
[* orange] Remove the tiny black cable from the right hand side of the circuit board with a pairby pinching down on the sides of tweezersthe black cable attachment and sliding it from the housing.
[* black] Use your fingers to lift the circuit board upward and out of the device.Gently plugunplug the orange ribbon that is connected to the board in completely remove the circuit board.
[* red] Unscrew the three 3 mmtwo 3mm T5 Torx screws securing the circuit board on the right.
[* orange] Remove the tiny black cable from the right hand side of the circuit board with a pairby pinching down on the sides of tweezersthe black cable attachment and sliding it from the housing.
[* black] Use your fingers to lift the circuit board upward and out of the device.Gently plugunplug the orange ribbon that is connected to the board in completely remove the circuit board.