Skip to main content

Changes to this Step

Edit by Luke Reilly

На одобрении

Deleted
Added
Unchanged

Step Lines

[* black] Insert unrolled paper clip into the small hole on the side of the optical drive. The tray will pop out of the laptop.
[* black] There is a 5.6mm screw in the lower case holding the drive in. Unscrew is to allow the drive to be removed.
[* black] Pull the drive firmly from the laptop, taking care not to bend the sliding rails on the side of the drive.

Image 2

No previous image

Added

Image 3

No previous image

Added