Skip to main content

Changes to this Step

Edit by Walter Galan

На одобрении

Deleted
Added
Unchanged

Step Lines

[* icon_reminder] Before proceeding, ensure that the battery has been removed to prevent any damage to components.
[*
black] Insert an unrolled paper clip into the small hole on the side of the optical drive. The
[* icon_note] The
tray will pop out of the laptop.
[* black] There is a 5.6mmred] Remove the single 5.6 mm Phillips screw in the lower case holdingsecuring the optical drive in. Unscrew is to allow the drive to be removedlower case.
[* black] PullFirmly pull the drive firmlystraight away from the laptop, taking carelaptop.
[* icon_caution] While pulling the drive out, be careful
not to bend the sliding rails on the sideboth sides of the optical drive.
[* icon_reminder] Before proceeding, ensure that the battery has been removed to prevent any damage to components.
[*
black] Insert an unrolled paper clip into the small hole on the side of the optical drive. The
[* icon_note] The
tray will pop out of the laptop.
[* black] There is a 5.6mmred] Remove the single 5.6 mm Phillips screw in the lower case holdingsecuring the optical drive in. Unscrew is to allow the drive to be removedlower case.
[* black] PullFirmly pull the drive firmlystraight away from the laptop, taking carelaptop.
[* icon_caution] While pulling the drive out, be careful
not to bend the sliding rails on the sideboth sides of the optical drive.

Image 2

Old Version

New Version

Image 3

Deleted