Перейти к основному содержанию

Changes to Step #1

Edit by Luke Reilly

На одобрении

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Remove the three 3.2mm screws (3.2mm) on the top of the drive and take off the top plate. Be careful, the casing is very flimsy.
[* black] Remove the three 3.2mm screws (3.2mm) on the top of the drive and take off the top plate. Be careful, the casing is very flimsy.
[* black] There is a 5.6mm screw in the lower case holding the drive in. Unscrew is to allow the drive to be removed.
[* black] Pull the drive firmly from the laptop, taking care not to bend the sliding rails on the side of the drive.
[* black] At this point you can remove the entire drive to have it replaced, or continue on with this guide to disassemble the optical drive itself

Image 1

Старая версия

Новая версия

Image 2

Старая версия

Новая версия

Image 3

Нет предыдущего изображения

Добавлено